ANQA D41 Asphaltic Roofing Primer
ANQA PRIMER D41 is a cold-applied asphaltic primer for roofing and general priming purposes for bituminous waterproofing and damp-proofing systems above and below ground. This high-penetration, low-viscosity primer ensures good bonding for all bituminous membranes, creating the perfect preparatory layer for your waterproofing projects.
For best results, the substrate surface must be clean and free of dust, dirt, oil, and grease before application. ANQA PRIMER D41 should be well stirred prior to use and can be applied by brush, roller, or spray. The typical coverage rate is between 0.3 to 0.5 L/m², depending on the surface properties. After application, the primer should not be left exposed for more than 24 hours; if this occurs, another coat is required. This product is supplied in 16-liter pails, as well as other packaging options.
Specifications
- Product Type: Cold-applied asphaltic primer.
- Standard Compliance: Complies with BS 6949-91, performance method.
- Key Features: High penetration, low viscosity, good bonding, and provides dust-proofing.
- Application: Can be applied by brush, roller, or spray.
- Packaging: Supplied in 16-liter pails (also available in 18L, 20L pails, and 200kg drums).
Applications
- General priming for bituminous waterproofing systems.
- Preparing surfaces for damp-proofing systems above and below ground.
- Used as a base coat on roofing substrates before applying bituminous membranes.
- Dust-proofing and sealing of concrete and masonry surfaces.
ANQA PRIMER D41 is an essential first step for ensuring the long-term performance of waterproofing systems. It contains a volatile solvent with a low flash point, so adequate ventilation is a must, and naked flames should be kept away from the application area. Personnel should always wear suitable protective equipment during use.
High penetration, low viscosity, and good bonding for all bituminous membranes.